Dongguan Ziitek Electronic Materials & Technology Ltd.
Dongguan Ziitek Electronic Materials & Technology Ltd. Professional TIM Manufacturer
Add to Cart
Fire resistance thermal acrylic tape TIA610P 1400 g/inch peel adhesion low impedance for replacing heat cure adhesive
The TIA610P Series products are mostly used for bonding heat dissipation fins, microprocessors and other power consumption semiconductors. This type of adhesive tape possesses ultimate bonding strength with low thermal impedance, with which in effect can be able to replace the method of lubricating grease and mechanical fixing.
Features
>Thermal Conductivity: 0.8 W/mK
>High bond strength to a variety of surfaces double sided pressure sensitive adhesive tape
>High performance, thermally conductive acrylic adhesive
>Fire rating equate 94 V0
Applications
>Mount heat sink onto BGA graphic processor or drive processor
>Mount heat spreader onto power converter PCB or onto motor control PCB
>High performance, thermally conductive acrylic adhesive
>Can be used instead of heat cure adhesive,screw mounting or clip mounting
| Typical Properties of TIA610P Series | |||||
| Typical Properties | TIA610P | test | |||
| Color | White | view | |||
| Adhesive Type | Acrylic Adhesive | ********** | |||
| Backing Type | PET | ********** | |||
| Continuous Use Temp | -45 °C to 120 °C | ********** | |||
| Thickness | 0.01" 0.254mm | ASTM D374 | |||
| Voltage Breakdown | > 1500 Vac | ASTM D149 | |||
| Thermal Conductivity | 0.8 W/mK | ASTM D5470 | |||
| 180°Peel Adhesion | > 1200 g/inch (Steel, Immediate) | PSTC-1 | |||
| 180°Peel Adhesion | > 1400 g/inch (Steel after 24 hrs) | PSTC-1 | |||
| Holding Power (25 °C/Hours) | > 48 Hours | PSTC-7 | |||
| Holding Power (80 °C/Hours) | > 48 Hours | PSTC-7 | |||
| Fire rating | equate 94 V0 | ***** | |||
Standard Thicknesses:
0.005"(0.127mm) 0.008"(0.203mm) 0.010"(0.254mm)
Consult the factory alternate thickness.
Standard Sizes:
40" x 100'(1016mm x 30.48M) Individual die cut shapes can be supplied.
Reinforcement:
TIA™600P series The coil can be filled with PET.
